NeuroTrac MyoPlus2 dual channel

Combined with NMS-STIM (Neuromuscular Stimulation) and ETS (EMG Triggered Stimulation) – 3 devices in 1 compact unit.

Used as a learning tool for both patient and clinician with emphasis on improving treatment techniques in the use of EMG and Neuromuscular stimulation.

£604.00

QTY  
SKU: EMG550 Category: Tag:

Description

  • Dual channel EMG (Biofeedback) combined with NMS-STIM (Neuromuscular Stimulation) & ETS (EMG Triggered Stimulation).
  • Passive and Active phases: EMG and NMS in one programme.
  • Manual and Automatic threshold control.
  • EMG Biofeedback between stimulation (muscle activity and tiredness indication when using muscle stimulation).
  • Stand alone device or used in conjunction with established multilingual software.
  • Pre-set neuromuscular Stimulation modes for: Continence, Sports, Rehab.
  • Custom programmes enabling up to 5 phases (any of: STIM W/R-MODCONT- ALT, EMG, ETS) to be set up in each programme.
  • Multilingual LCD screen and voice prompts for Biofeedback.
  • For home users: Produces and prints (with the optional PC Software) the comprehensive patient progress reports on a day to day basis providing average readings (2 channels) on work/rest, peak, onset and muscle release times, work and rest deviations and the average mA current.
  • Used as a learning tool for both patient and clinician with emphasis on improving treatment techniques in the use of EMG and Neuromuscular stimulation.
  • Multilingual LCD screen prompts.
  • 4 x AA batteries {No mains required}
Weight 0.16 kg
Dimensions 150 x 89 x 35 mm
Technical Specifications EMG (Biofeedback) Dual channel EMG EMG Range: 0.2 to 2000 μV RMS (continuous) Sensitivity: 0.l μV RMS Accuracy: 4% of μV reading +/-0.3 μV at 200 Hz Selectable Bandpass filter – 3db Bandwidth, a. Wide: 18 Hz +/- 4 Hz to 370 Hz +/- 10% – Reading below 235 microvolts 10 Hz +/-3 Hz to 370 Hz +/- 10% – Reading above 235 microvolts b. Narrow: 100 Hz +/- 5% to 370 Hz +/- 10% Notch filter: 50 Hz (Canada 60Hz) – 33 dbs (0. 1% accuracy) Common Mode Rejection Ratio: 130 dbs Minimum @ 50 Hz Batteries: 4 x 1.5V ( AA battery) Optional Charger: CE approved. Work / Rest periods: 2-99 seconds Number of Trials: 1-99 STIM (Neuromuscular Stimulation) 2 channel Stimulator Amplitude: 0-90 mA into 500 Ohm load – actual mA will tend to be less than indicated due to Electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 75 mA, at 1500 Ohms load the maximum will be limited to 50 mA. Type: Constant current, maximum output voltage 70 Volts +5 / -10 Volts Waveform: Symmetrical, rectangular, bi-phasic with net zero DC current Pulse width selection: 50-450 μS (2% accuracy) Pulse rate selection: 2-100 Hz (2% accuracy) Work / Rest periods: 2-99 seconds Time 1 – 99 minutes Ramp up time: 0.1 – 9.9 seconds Preset and user programmable treatment Programs Automatic output shut off with detection of open electrode above 0.5 mA Battery: Low battery indication at 5.4 volts +/- 0.2 volts, automatic shut off when voltage dropps below the low indication. Replace the batteries immediately! The device goes off automatically when not in use (energy saving): for example when in settings and no key pressed over 1 minute, when in stimulation mode (home screen) and all channels are 0mA. Environmental Conditions for use: +10 to +30 degrees Centigrade. 0-90% Humidity. Environmental conditions for storage & transport: -10 to +50 degrees Centigrade. 0-90% Humidity. Physical dimensions: Length 150 mm, Width 89 mm, Depth 35 mm. Weight: MyoPlus2 device: 0.16 Kg (without batteries).

Additional information

Weight 0.16 kg
Dimensions 150 x 89 x 35 cm
Technical Specifications

EMG (Biofeedback) Dual channel EMG EMG Range: 0.2 to 2000 μV RMS (continuous) Sensitivity: 0.l μV RMS Accuracy: 4% of μV reading /-0.3 μV at 200 Hz Selectable Bandpass filter – 3db Bandwidth, a. Wide: 18 Hz /- 4 Hz to 370 Hz /- 10% – Reading below 235 microvolts 10 Hz /-3 Hz to 370 Hz /- 10% – Reading above 235 microvolts b. Narrow: 100 Hz /- 5% to 370 Hz /- 10% Notch filter: 50 Hz (Canada 60Hz) – 33 dbs (0. 1% accuracy) Common Mode Rejection Ratio: 130 dbs Minimum @ 50 Hz Batteries: 4 x 1.5V ( AA battery) Optional Charger: CE approved. Work / Rest periods: 2-99 seconds Number of Trials: 1-99 STIM (Neuromuscular Stimulation) 2 channel Stimulator Amplitude: 0-90 mA into 500 Ohm load – actual mA will tend to be less than indicated due to Electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 75 mA, at 1500 Ohms load the maximum will be limited to 50 mA. Type: Constant current, maximum output voltage 70 Volts 5 / -10 Volts Waveform: Symmetrical, rectangular, bi-phasic with net zero DC current Pulse width selection: 50-450 μS (2% accuracy) Pulse rate selection: 2-100 Hz (2% accuracy) Work / Rest periods: 2-99 seconds Time 1 – 99 minutes Ramp up time: 0.1 – 9.9 seconds Preset and user programmable treatment Programs Automatic output shut off with detection of open electrode above 0.5 mA Battery: Low battery indication at 5.4 volts /- 0.2 volts, automatic shut off when voltage dropps below the low indication. Replace the batteries immediately! The device goes off automatically when not in use (energy saving): for example when in settings and no key pressed over 1 minute, when in stimulation mode (home screen) and all channels are 0mA. Environmental Conditions for use: 10 to 30 degrees Centigrade. 0-90% Humidity. Environmental conditions for storage & transport: -10 to 50 degrees Centigrade. 0-90% Humidity. Physical dimensions: Length 150 mm, Width 89 mm, Depth 35 mm. Weight: MyoPlus2 device: 0.16 Kg (without battaeries).

Reviews

There are no reviews yet.

Be the first to review “NeuroTrac MyoPlus2 dual channel”
facebook twitter google_plus linkedin